Device Settings
ColorQube 9301/9302/9303 Multifunction Printer
User Guide
197
Device Settings
The Device Settings are used to customize options that are specific to the printer, such as Energy Saver
and Paper Tray settings.
General
Select General to access the following settings:
• Energy Saver on page 197
• Date and Time on page 197
• Language/Keyboard Selection on page 198
• Custom Keyboard Button on page 198
• Xerox Customer Support on page 198
• Entry Screen Defaults on page 198
• Measurements on page 198
• Paper Size Preference on page 199
• Audio Tones on page 199
• Billing Impression Mode on page 199
• Feature Installation on page 199
Energy Saver
The printer is designed to be energy efficient and automatically reduces its power consumption after
periods of inactivity. This utility enables the administrator to modify the time the printer spends
between standby, low power, and sleep modes.
• Intelligent Ready wakes up and sleeps automatically, based on previous usage.
• Job Activated wakes up when an activity is detected.
• Scheduled wakes up and sleeps at set times on a daily basis. Select Scheduled Settings to
program the setting for each day.
• Activity is selected if the printer is required to wake up when an activity is detected.
• Time is selected if specific Warm up Time and Energy Saver Time are required. Select the
time required for each option by using the scroll bar.
• Fast Resume reduces the time taken to wake up. This changes the default sleep/low power
timeouts and increases energy usage.
Date and Time
Some features and functions on the printer require the local date and time, such as Delayed Send or
the Configuration sheet. This utility enables you to set and change the local date and time on the
printer.
• GMT Offset (Time Zone): Use this option to set the difference between your local time and
Greenwich Mean Time. Enter the GMT Offset time from -12.0 to +14.0 hours, using the arrow
buttons.
To Next Page
Loading...
Need help?
General
