Fax from PC Options
ColorQube 9301/9302/9303 Multifunction Printer
User Guide
74
Send Speed
You can choose one of the three transmission speeds. The options in the Send Speed drop-down list
are:
• G3 (Automatic): This is the fastest transmission rate and is the default setting. This rate minimizes
transmission errors by using Error Correction Mode (ECM). The initial transmission speed is
33,600
bits per second (bps).
• G3 (14.4Kbps): This speed option selects the transmission rate, based on the maximum
capabilities of the receiving fax machine. The initial transmission speed is 14,400 bps. This rate
minimizes transmission errors by using ECM.
• Forced 4800 bps: This speed is used in areas of low quality communication when experiencing
telephone noise or when fax connections are susceptible to errors. The speed of 4800 bps is slow
but less susceptible to errors. In some regions, use of 4800 bps is restricted.
Fax Resolution
You can choose one of the three image resolutions, depending on the type of documents being sent.
The higher the resolution, the better the received image will be, but a high-resolution image will take
longer to be transmitted. The options are:
• Standard is recommended for text originals. It requires less communication time but does not
produce the best image quality for graphics and photos.
• Fine is recommended for line art and photos. This is the default resolution and the best choice in
most cases.
• Superfine is recommended for photos and halftones, or images that have gray tones. It requires
more communication time but produces the best image quality.
Send Time
It is sometimes called Delayed Send. Use this feature to transmit fax messages during off-peak hours
or when sending to another country or time zone. The default setting called Send Now sends the fax
immediately.
To send the fax at a specific time in the next 24 hours, select Send At and either type or use the arrow
buttons to choose the local time you want the fax to be sent.
Dialing Prefix
Use the Dialing Prefix option if you need to add information such as an external access number, a
country code, or an area code, to the recipient number you have selected on the Recipients screen.
Credit Card
Use the Credit Card option if you want to bill the call to a credit card.
To Next Page
Loading...
Need help?
General
