Service Settings
ColorQube 9301/9302/9303 Multifunction Printer
User Guide
207
Service Settings
The Service Settings are used to customize options that are specific to individual services, such as Copy,
Fax, or Print.
Copy Service Settings
Select the Copy Service Settings option to access the following settings:
• Feature Defaults on page 207
• Edge Erase Presets on page 207
• Image Shift Presets on page 207
• Reduce/Enlarge Presets on page 208
• Reading Order Options on page 208
• Auto Image Rotation on page 208
Feature Defaults
Is used to select the default settings for each programing feature within the Copy service, such as
paper supply, output, and 2-sided.
• Select the default required for each feature in each of the programing tabs.
• Select Sa
ve Defaults. The selected settings become the default settings for each copy job.
A confirmation screen is displayed.
• Select Do
ne to return to the previous screen.
Edge Erase Presets
Enables you to set up the Edge Erase pre-set entries. There are 2 pre-named, pre-set options and an
Available setting. All of the presets can be customized with names and settings to meet your needs.
Note: The printer applies an automatic edge deletion t
o all the printed output.
• Select the preset option required from the Pr
esets menu.
• Select the side options, as required, Side 1, Side 2, and
Mirror Side 1.
• Select Name to cust
omize the name of the preset option. Use Clear Text to clear the existing
name and type a new name by using the touch screen keyboard. Use the
option or backspace
in the keyboard to delete an incorrect entry, or
to delete the entire entry. Select Save.
• Enter the deletion amounts for the To
p, Bottom, Left, and Right margins. The parameters entered
are the defaults shown when the preset is selected.
Image Shift Presets
Enables you to set up the Image Shift pre-set entries. There are two pre-named, pre-set options and an
Available setting. All of the presets can be customized with names and settings to meet your needs.
• Select the preset option required from the Pr
esets menu.
To Next Page
Loading...
Need help?
General
