Operational Safety Information
ColorQube 9301/9302/9303 Multifunction Printer
User Guide
226
Operational Safety Information
Your Xerox equipment and supplies have been designed and tested to meet strict safety requirements.
These include safety agency examination, approval, and compliance with established environmental
standards.
To ensure continued safe operation of the Xerox equipment, follow these safety guidelines at all times:
Electrical Supply
This section provides important electrical supply safety information to read before installing or using
the printer.
Read the information in the f
ollowing sections:
• Power Outlet Electrical Safety on page 226
• Power Cord Electrical Safety on page 226
• Equipment Safety on page 227
• Emergency Power Off on page 228
• Disconnect Device on page 228
Power Outlet Electrical Safety
This equipment must be operated from the type of electrical supply indicated on the data plate label
on the rear cover of the equipment. If you are not sure that the electrical supply meets the
requirements, consult the local power company or a licensed electrician for advice.
Ensure the electrical supply outlet is near
the equipment and easily accessible.
WARNING: This equipment must be connected to a ground fault interrupter. This equipment is
supplied with a plug that has a protective earth pin. Only this plug fits into an earthed electrical
outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact a
licensed electrician to replace the outlet. Always connect the equipment to a correctly grounded
power outlet. If in doubt, have the outlet checked by a qualified electrician.
Improper connection of the equipment-grounding
conductor can result in electrical shock.
Power Cord Electrical Safety
• Use only the power cord supplied with this equipment.
• Plug the power cord directly into a grounded electric
al outlet. Do not use an extension cord. If you
do not know if an outlet is grounded, consult a qualified electrician.
• Do not place this equipment where people c
an step on or trip on the power cord.
• Do not place objects on the power cord.
To Next Page
Loading...
Need help?
General
