Xerox Wide Format 6605 User Manual

7. Rotate the Roll Media until the lead edge is gripped in the roller.
The Roll Media will automatically load, and then stop.
NOTE
If the Roll Media cannot be loaded correctly because its lead edge is damaged,
trim the lead edge before setting it in place.
WARNING
Do not open the Roll 1 or Roll 2 Cutter Cover unless you are specifically directed
to do so.
8. Press the Cutter Button to cut the lead edge of roll media.
The lead edge of the Roll Media is cut.
NOTE
Pressing the Cutter Button one time cuts about 8.3 inches (210 mm) of media
from the lead edge of the roll. When the Cutter Button is held down, the Roll
Media feeds continuously until the cutter button is released. The Roll Media is
cut when the Cutter Button is released.
Xerox
®
Wide Format 6604/6605 Solution
™
1-30
User Guide
Product Overview

Xerox Wide Format 6605 Specifications

General

Brand	Xerox
Model	Wide Format 6605
Category	Printer
Language	English