Before using the machine
WorkCentre 5019/5021
User Guide
1-5
Safety notes
Before using this product, read the safety notes carefully.
This product and recommended supplies have been tested and found to comply with strict safety
requirements including safety agency approvals and environmental standards.
Note Any unauthorized alteration including an addition of new functions or connection to
external devices may not be covered by the product warranty. Contact your local Xerox
representative for more information.
Follow all warning instructions marked on this product. The following symbols are used to indicate
danger of personal injury or machine damage:
Electrical safety
This product must be operated by a power source as indicated on the machine's data plate. Consult
your local power company to check if your power source meets the requirements.
WARNINGS:
• Connect this product to a protective earth circuit.
• This product is supplied with a plug that has a protective earth pin. The plug fits only into an
earthed electrical outlet. This is a safety feature. If the plug doesn't fit to the outlet, contact an
electrician to replace the outlet to avoid risk of electric shock. Never use an earthed adapter plug
to connect the product to the electrical outlet that has no earth connection terminal.
Improper connection of a grounding conductor may cause electric shock.
• Plug the power cord directly into a grounded electrical outlet. To prevent overheat and a fire
accident, do not use an extension cord, a multi-plug adaptor or a multiple connector. Consult your
local Xerox representative to check if an outlet is grounded.
• Connect this product to a branch circuit or an outlet that has larger capacity than the rated
ampere and voltage of this product. See the data plate on the rear panel of this product for its
rated ampere and voltage.
• Never touch the power cord with wet hands. It may cause electric shock.
• Do not place any object on the power cord.
• Always keep the plug connection free of dust. A dusty or damp environment may cause a minute
electric current in a connector. It may generate heat and eventually cause a fire.
WARNING:
Risk of severe or fatal injury if not followed
strictly.
CAUTION:
Risk of injury to user or damage to machine if
not followed strictly.
To Next Page
Loading...
Need help?
General
