Product overview
WorkCentre 5019/5021
User Guide
3-7
Switching the power off
Notes
• Do not switch the power off in the following situations. If the power is switched off, the
processing data may be erased.
• While data is being received
• While a job is being printed
• While a job is being copied
• While a job is being scanned
• When switching the power off, wait 5 seconds after outputs have been delivered.
• When powering the machine on after it has been switched off, wait 10 seconds after the
display goes off.
1. Before switching the power off, make sure that the machine has completed all copy or print jobs.
Then, make sure that the Data indicator does not light up.
2. Press the power switch to the Off position to switch the power off.
To Next Page
Loading...
Need help?
General
