Loading paper
WorkCentre 5019/5021
User Guide
4-11
Changing paper size
This section describes how to change paper size in Trays 1 and 2.
Notes
• Do not load mixed paper sizes into a tray.
• When you change the size and orientation of paper in a tray, change the paper size
setting to match the paper size. For more information on how to change the paper size
and orientation settings, refer to Setting the paper size on page 4-13.
Changing the paper size for Trays 1 and 2
1. Pull out the tray until it stops.
Notes
• While the machine is copying or printing, do not pull out the tray that the job uses.
• To prevent paper jams or loading errors, do not load different sizes or types of paper on
top of any remaining paper in a tray.
2. Remove any paper loaded in the tray.
3. For Tray 1, push down the metal plate to the bottom of the tray.
To Next Page
Loading...
Need help?
General
