Loading paper
WorkCentre 5019/5021
User Guide
4-2
Supported paper weights and sheet counts
*
1
When using 80 gsm paper
*
2
When using Xerox standard paper
Notes
• Paper jams may result if you attempt to print on a different paper type or size than the
type or size selected in the print driver, or from a tray that does not support the loaded
paper. Select the correct paper size, type, and tray to ensure successful printing.
• Basis weight is the weight of one sheet of paper of 1 m
2
in size.
• Ream weight is the weight of 1,000 sheets of duodecimo size (788 × 1,091 mm) paper.
Supported paper sizes:
• Maximum: A3, 11 × 17"
• Minimum: Tray 1 and 2: B5, Bypass tray: A5, 5.5 × 8.5"
Duplexing (2-sided printing)
The following paper types are supported for automatic duplexing:
• Lightweight (60 to 63 gsm)
• Plain (64 to 90 gsm)
• Heavyweight (91 to 110 gsm) *Bypass tray only
Supported paper type
Standard paper
When printing or copying on commonly used paper (plain paper), use paper meeting the standards
described below. To copy or print as clear as possible, we recommend the following standard paper.
Paper tray Basis weight/Ream weight Loadable quantity
Tray 1 (standard) 60 to 90 gsm
Ream weight: 51.6 - 77.4 kg
250 sheets *
1
(Up to 27 mm)
Tray 2
(one tray module
(optional))
60 to 90 gsm
Ream weight: 51.6 - 77.4 kg
500 sheets *
1
(Up to 54 mm)
Bypass tray 60 to 110 gsm
Ream weight: 51.6 - 94.6 kg
100 sheets *
2
(Up to 10 mm)
Paper name
Basis weight
(gsm)
Paper
type
Notes/countermeasure
P paper 64 Plain Tough plain paper suitable for internal
documents at the office.
To Next Page
Loading...
Need help?
General
