Product overview
WorkCentre 5019/5021
User Guide
3-10
Control panel
The names and functions of the control panel's components are described below.
No. Component Description
1 2 Sided button Press this button to select 1 Sided or 2 Sided copying.
Normally, the icon is off (1 Sided → 1 Sided). The selection moves to the
right from Off (1 Sided → 1 Sided) → 1 Sided → 2 Sided → 2 Sided → 2
Sided → 2 Sided → 1 Sided every time the button is pressed. As you press
the button when 2 Sided → 2 Sided is selected, the indicator light goes off
again.
For more information, refer to 2-sided on page 5-18.
2 ID Card Copy button Press this button to use the ID Card Copy feature.
While the ID Card Copy feature is selected, the button is lit.
For more information, refer to ID card copy on page 5-15.
3 Original Size button Press this button to specify the scanning size and orientation for using the
document glass.
When the document is placed on the document feeder, the scanning size is
set automatically.
The scanning size changes on the machine status diagram every time that
the button is pressed.
For more information, refer to Original size on page 5-13.
4 Numeric keypad Press these numeric buttons to enter numbers, such as the total number of
copies.
5 Log In / Out button Press this button to enter or exit System Administration mode. The Log
In/Out button is lit in System Administration mode.
For more information, refer to Entering System Administration mode on
page 8-2.
To Next Page
Loading...
Need help?
General
