Xinje DS2 series User Manual

Preface
I
Preface
Constitution of This Manual
This manual is divided into 7 chapters.
1. Checking Product and Part Names
This chapter describes the procedure for checking products upon delivery as well as names
for product parts.
2. Installation
This chapter describes precautions for servomotor and servo driver installation.
3. Wiring
This chapter describes the procedure used to connect DS2 Series products to peripheral
devices and gives typical examples of main circuit wiring as well as I/O signal
connections.
4. Parameter Settings and Functions
This chapter describes the procedure for setting and applying parameters.
5. Use Digital Panel
This chapter describes the basic operation of the digital panel and the features it offers.
6. Ratings and Characteristics
This chapter provides the ratings, torque-speed characteristics diagrams, and dimensional
drawings of the DS2 series servo drives and MS series servomotors.
7. Alarm Information
This chapter describes the alarm information of DS2 series servo drivers.
Intended User
This manual is intended for the following users.
 Those designing DS2 Series servodrive systems.
 Those installing or wiring DS2 Series servodrives.
 Those performing trial operation or adjustments of DS2 Series servodrives.
 Those maintaining or inspecting DS2 Series servodrives.
How to AcquireThis Manual
1．Electrical Manual
(1) Log on Xinje official website www.xinje.com to download.
(2) Acquire this manual on a CD from an authorized distributor.
This chapter describes the constitution of this manual, the intended user, and how to
acquire this manual.
Preface

Xinje DS2 series Specifications

General

Brand	Xinje
Model	DS2 series
Category	Servo Drives
Language	English