5-51
E
POWR
Oil pump assembly installation
1. Fill:
• Oil pump assembly
CAUTION:
Be sure to fill the oil pump assembly with
engine oil through the scavenge and feed
ports.
Filling steps:
1. Fill the oil pump assembly with engine oil
through the feed port a and scavenge
port b.
NOTE:
The oil level should be up to the brim.
2. Turn the driven gear 1 of the oil pump
clockwise while filling the oil pump assem-
bly.
3. Continue filling the oil pump assembly until
engine oil comes out of the ports c.
2. Install:
• Oil pump assembly
Recommended engine oil:
SAE: 10W-30, 10W-40, 20W-40, or
20W-50
API: SE, SF, SG, SH, SJ, or SL
T
R
.
.
Oil pump assembly bolt:
11 N·m (1.1 kgf·m, 8.1 ft·lb)
LOCTITE 572
b
a
1
c
Oil cooler, oil pump assembly, and drive gear
To Next Page
Loading...
Need help?
General