Yamaha WaveRunner FX SHO Service Manual

1-50
E
GEN
INFO
1
2
3
4
5
6
7
8
9
Cam position sensor failure control
The cam position sensor failure control is activated under the following conditions.
• If the cam position sensor failed.
• If the engine speed exceeds about 1,000 r/min.
• If the above conditions are maintained for 10 seconds.
Meter & buzzer: No indication or buzzer sounds.
ECM: The opening angle of the ETV is regulated and the engine speed is limited to 3,500–3,800
r/min.
If the engine speed exceeds 5,000 r/min, the ECM cuts the ignition and fuel injection.
Cancel: The engine is turned off.
Battery disconnection warning
The ETV failure control is activated when a battery cable is disconnected during normal operation.
Technical tips

Yamaha WaveRunner FX SHO Specifications

General

Manufacturer	Yamaha
Model	WaveRunner FX SHO
Category	Personal Watercraft
Engine Type	4-cylinder, 4-stroke, Supercharged
Displacement	1812cc
Bore x Stroke	86mm x 78mm
Fuel Delivery	Electronic Fuel Injection
Horsepower	210 HP
Starter System	Electric
Lubrication System	Wet sump
Length	132.7 in (3.37 m)
Fuel Capacity	18.5 gal (70 L)
Oil Capacity	5.3 qt (5.0 L)
Rider Capacity	3 persons
Cooling System	Water-cooled
Width	1.23 m
Dry Weight	377 kg