5-83
E
POWR
Drive coupling removal
1. Remove:
• Drive coupling 1
Removal steps:
1. Remove the plug from the drive coupling.
2. Hold the transfer shaft with the special ser-
vice tool 2, and then remove the drive
coupling 1 with the special service tool 3.
Crankshaft holder 2:
YB-06562/90890-06562
Coupler wrench 3:
90890-06729
132
Flywheel magneto removal
1. Remove:
• Transfer shaft 1
Removal step:
1. Hold the flywheel magneto 2 with the spe-
cial service tools 3 and 4, and then
remove the transfer shaft 1 with the spe-
cial service tool 5.
Shaft holder 3:
90890-06721
Driver handle 4:
90890-06722
Crankshaft holder 5:
YB-06562/90890-06562
5
3
1
2
4
Generator cover and flywheel magneto
To Next Page
Loading...
Need help?
General