EasyManuals Logo

Yamaha WaveRunner FX SHO Service Manual

Yamaha WaveRunner FX SHO
433 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background image
1-46
E
GEN
INFO
1
2
3
4
5
6
7
8
9
High intake air pressure control
The high intake air pressure control is activated under the following conditions.
• If the engine speed exceeds 7,550 r/min.
• If the intake air pressure exceeds 145 kPa.
• If the above conditions are maintained for 1.5 seconds.
Meter & buzzer: No indication or buzzer sounds.
ECM: The throttle valve is closed until the above conditions are no longer present.
The throttle valve doesn't open until the high intake air pressure control is canceled.
Cancel: The throttle lever is released to the fully closed position.
Knock control
The knock control system retards the ignition timing to prevent the occurrence of engine knock.
The knock control is activated under the following conditions.
• If the engine speed is higher than 2,000 r/min after warming up the engine.
• If the knock sensor detects the engine knock.
Technical tips

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yamaha WaveRunner FX SHO and is the answer not in the manual?

Yamaha WaveRunner FX SHO Specifications

General IconGeneral
ManufacturerYamaha
ModelWaveRunner FX SHO
CategoryPersonal Watercraft
Engine Type4-cylinder, 4-stroke, Supercharged
Displacement1812cc
Bore x Stroke86mm x 78mm
Fuel DeliveryElectronic Fuel Injection
Horsepower210 HP
Starter SystemElectric
Lubrication SystemWet sump
Length132.7 in (3.37 m)
Fuel Capacity18.5 gal (70 L)
Oil Capacity5.3 qt (5.0 L)
Rider Capacity3 persons
Cooling SystemWater-cooled
Width1.23 m
Dry Weight377 kg

Related product manuals