E
ELEC
– +
7-15
2. Measure:
• Pickup coil resistance
Out of specification → Replace the sta-
tor coil assembly.
Measurement steps:
1. Disconnect the pickup coil coupler 1.
2. Measure the pickup coil resistance.
Pickup coil resistance at 20 °C (68 °F)
(reference data):
White (W) – Black (B)
459–561 Ω
BW
1
Charging system
Stator coil
1. Measure:
• Stator coil output peak voltage
Below specification → Measure the sta-
tor coil resistance.
Measurement steps:
1. Disconnect the stator coil coupler 1.
2. Connect the test harness (3 pins) 2 to the
stator coil coupler 1.
Test harness (3 pins):
YB-06870
Test harness SMT250-3 (3 pins):
90890-06870
G
G
G
WR B
G
G
G
B
R
W
GG
G
1
2
Ignition system / Charging system
To Next Page
Loading...
Need help?
General