E
ELEC
– +
7-63
Remote control receiver
1. Measure:
• Remote control receiver input voltage
Out of specification → Check the wiring
harness.
Measurement steps:
1. Disconnect the remote control receiver
coupler 1.
2. Measure the input voltage at the remote
control receiver coupler terminals (wiring
harness end).
Remote control receiver input voltage:
Red (R) – Black (B)
12 V (battery voltage)
1
R
B
2. Measure:
• Remote control receiver output voltage
Out of specification → Replace the
remote control receiver.
Measurement steps:
1. Disconnect the multifunction meter coupler
1 from the remote control receiver.
2. Push the unlock button, and then measure
the remote control receiver output voltage
at the multifunction meter coupler terminal
(wiring harness end) and ground.
Remote control receiver output
voltage (reference data):
Blue/yellow (L/Y) – Ground
11.0–12.0 V
L/Y
1
Remote control system
To Next Page
Loading...
Need help?
General