ABB AC 800F User Manual

5 AC 800F Functional Description
5-33
+--------------------------------------------------------------------+
|| |
| A B B | 1st Stage >> Startup Operation Checkout << |
| | 1st Stage version: F02.001.00, Jun 20 2001 |
| | EPROM version : 6.80 |
| FieldController | (C) 1998...01 ABB Automation Products GmbH |
|| |
+--------------------------------------------------------------------+
Hardware initialized
Diagnostic interface................: OK
Testing checksum EPROM..............: OK
Testing SRAM
WORD access.................: OK
BURST access................: OK
Testing EDC Unit....................: OK
Enabling EDC Unit...................
Testing counter.....................: OK
*** Internal selftest completed, 1st Stage is activating Bootloader... ***
Fig. 5-18 1
st
-Stage system messages
If a serious error occurs during the 1
st
Stage self-test, an error messages as shown
below or similar is displayed, depending on the reason:
Testing SRAM
WORD access.................: failed !
-----------------------------------------------------------------
Error code 0x10000108 added to error memory...
Program terminated
The red Failure LED lights up permanently. This indicates that the AC 800F is
defective.
5.4.3 Messages of the hardware error memory
When a serious error has been detected, the location, error code, and date/time are
saved in the CPU board non-volatile memory. The error memory permits to save five
entries. It improves system support and maintenance since it allows for a better
diagnosis (in most cases the terminal has not yet been connected when the first
errors occur).
Note that the AC 800F will repeat a diagnosis message indicating a
serious error upon actuation of the Return key until it is reset.
After each restart the 1
st
Stage software will check the error memory, and the
following screen will be displayed:
In former operation, following self test errors have been occurred:
Date Time Error Location (test of...)
990401 162501 0x10000108 SRAM, word access
Continue anyway <ESC> ?: n

ABB AC 800F Specifications

General

Brand	ABB
Model	AC 800F
Category	Controller
Language	English