3 Mounting the AC 800F
3-3
The overall mounting height of
the AC 800F with strain relief
and connected cables is around
202 mm.
The corresponding mounting
depth is 190 mm then.
The same mounting height and
depth are valid if the special
contact ledge RW 855F is used.
Fig. 3-2 Housing dimensions with contact ledge,
connectors and cables
3.1.2 Cabinet or switch box mounting
Two AC 800F can be mounted side by side without requiring a new frame or a
modified cabinet.
Figure 3-3 shows as an example how to mount a DRA 02 rack with a DPW 01 power
supply of the Freelance 2000 system together with 2 AC 800F in a cabinet.
Horizontal DIN TS35/EN 50022 top hat rails are needed for the AC 800F and the
power supply. The devices then simply have to be attached to these top hat rails.
When mounting the devices to the top hat rails, make sure that they
are positioned properly and that the rail clamping spring snaps in.
To Next Page
Loading...
Need help?
General
