ABB i-bus KNX AC/S 1.x.1 Series User Manual

ABB i-bus
®
KNX
Parameters
176 2CDC508198D0211 Rev. A | AC/S 1.x.1
7.5.3 Sockets
The ASM has an input socket or an output socket depending on the template set in the parameters. The
data point type is dependent on the configuration.
Overview of the ASM sockets for linking to other modules:
Type Object name Data type
Input Value Configuration-dependent
Output Value Configuration-dependent
Input sockets
Object name
Data type
Value Configuration-dependent
The module has an input socket if the ASM input socket to KNX template or the Freely configurable template is selected with
the ASM socket: Input parameter.
Input for outputting a value from another module on one of the interfaces activated.
Signal value:
Configuration-dependent
Output sockets
Object name Data type
Value
Configuration-dependent
The module has an output socket if the KNX to WebUI, KNX to BACnet, KNX to ASM output socket, WebUI to KNX, WebUI to
KNX with update, BACnet to KNX, BACnet to KNX with update template or the Freely configurable template is selected with
the ASM socket: Output parameter.
The current value is output for the linking to other modules.
Signal value:
Configuration-dependent

ABB i-bus KNX AC/S 1.x.1 Series Specifications

General

Brand	ABB
Model	i-bus KNX AC/S 1.x.1 Series
Category	Controller
Language	English