ABB i-bus KNX AC/S 1.x.1 Series User Manual

ABB i-bus
®
KNX
Operation
474 2CDC508198D0211 Rev. A | AC/S 1.x.1
9.2 Web user interface
9.2.1 Menu bar
Building
Opens the dashboard with an overview of the ASMs installed.
Settings
Opens the device settings. See chapter 7.2.3, Web user interface device settings. The device settings are
only visible for the "admin" user.
Clock
Displays the device clock. If there are problems with the time synchronization, the clock is displayed in red.
Messages
Opens the device messages. Only the "admin" can delete these messages.
User
Displays the user logged in. You can log out and change your password using the menu. Passwords can
also be changed in the DCA device settings, see chapter 7.2.2.4, WebUI – Users parameter page.
Language
Selects the language for the web user interface. This setting is saved for each user.
Device information
Opens the version number and the legal information on the device.
Login/Logout
For logging in and out the user.

ABB i-bus KNX AC/S 1.x.1 Series Specifications

General

Brand	ABB
Model	i-bus KNX AC/S 1.x.1 Series
Category	Controller
Language	English