ABB i-bus KNX AC/S 1.x.1 Series User Manual

ABB i-bus
®
KNX
General
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 9
1 General
1.1 Using the product manual
This manual provides detailed technical information relating to the function, installation and programming
of the ABB i-bus
®
KNX device.
1.2 Legal disclaimer
We reserve the right to make technical changes or modify the contents of this document without prior
notice.
The agreed properties are definitive for any orders placed. ABB AG does not accept any responsibility
whatsoever for potential errors or possible lack of information in this document.
We reserve all rights in this document and in the subject matter and illustrations contained therein.
Reproduction, transfer to third parties or processing of the content – including sections thereof – is not
permitted without prior express written permission from ABB AG.
The product makes use of open source software. You must accept the license agreement before using the
software for the first time.
Copyright© 2018 ABB AG
All rights reserved
1.3 Explanation of symbols
1. Instructions in specified sequence
2.
► Individual actions
a) Priorities
1)
Processes run by the device in a specific sequence
• 1st-level list
o
2nd-level list
Table 1: Explanation of symbols

ABB i-bus KNX AC/S 1.x.1 Series Specifications

General

Brand	ABB
Model	i-bus KNX AC/S 1.x.1 Series
Category	Controller
Language	English