ABB i-bus KNX AC/S 1.x.1 Series User Manual

ABB i-bus
®
KNX
Parameters
62 2CDC508198D0211 Rev. A | AC/S 1.x.1
7.2.2.4 WebUI – Users parameter page
Five user profiles with a corresponding rights structure are predefined for the device's web user interface.
It is not possible to add any more profiles.
On this parameter page you can set or reset the passwords for four of the web user interface users; it is
not possible to assign a password to the "without login" profile. The passwords are active on the device
after the ETS download.
Every user can change their password in web user interface. In the state as supplied, you can access the
web user interface using the user "admin" and the initial password "Admin123".
For further information, see chapter 7.3.3, Web user interface
.
User profile Rights
admin "Administrator"
This user has all rights
• Change everything in the ASM detailed view on the web user
interface
• Change web user interface settings
• Undertake firmware updates
• Delete messages
expert "Expert"
This user has the following rights:
• Change everything in the ASM detailed view on the web user
interface
user "User"
This user has the following rights:
• Change the normal settings in the ASM detailed view on the web
user interface. Expert settings are read-only.
viewer "Viewer"
This user has the following rights:
• Can read all settings in the ASM detailed view on the web user
interface, but not change them.
without login "Without login"
This user profile can be used to make ASMs visible even without
logging into the web user interface. In this situation, the following rights
are possible:
• Can read all settings in the ASM detailed view on the web user
interface, but not change them.

ABB i-bus KNX AC/S 1.x.1 Series Specifications

General

Brand	ABB
Model	i-bus KNX AC/S 1.x.1 Series
Category	Controller
Language	English