ABB i-bus KNX AC/S 1.x.1 Series User Manual

ABB i-bus
®
KNX
Commissioning
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 47
6.5.6 Menu bar
Various functions and commands for editing the project are available on the menu bar. You will find further
information in the following chapters.
Save
ETS automatically saves the changes in the ETS project at regular intervals and on leaving DCA. If
changes to the project have not yet been saved, the following message is displayed:
If this message is displayed and you want to program the device (download), please first click "Save",
otherwise the latest configuration will not be loaded into the device.
Edit
Buttons for cutting, copying, pasting and deleting a selected element.
Undo and redo
Buttons for using the undo and redo function within DCA.
Linking view
Button for opening and closing the Linking view with the ASM selected.

ABB i-bus KNX AC/S 1.x.1 Series Specifications

General

Brand	ABB
Model	i-bus KNX AC/S 1.x.1 Series
Category	Controller
Language	English