ABB i-bus KNX AC/S 1.x.1 Series User Manual

ABB i-bus
®
KNX
Parameters
368 2CDC508198D0211 Rev. A | AC/S 1.x.1
7.11.6 WebUI
Open the detailed view of the ASM by clicking the ASM's tile.
The detailed view consists of two pages on which you make various settings in the individual sections.
Distribution circuit page
This section shows the current operating status of the cooling distribution circuit controller linked via KNX.
If activated in the settings, the control by the cooling distribution circuit controller can be overridden by the
"admin" and "expert" users via the web user interface. For this purpose the slider must be dragged to one
of the two "Override" positions. The current state of the cooling distribution circuit controller continues to be
displayed in "Auto" during the override.

ABB i-bus KNX AC/S 1.x.1 Series Specifications

General

Brand	ABB
Model	i-bus KNX AC/S 1.x.1 Series
Category	Controller
Language	English