ABB XIO-04 User Manual

XIO USER MANUAL | 2106424MNAB | 51
Figure 4-19: Restart message
IMPORTANT NOTE:
Any existing TCP/IP connection is lost when the XIO IP address changes and
the network interface restarts.
If you are using one of the Ethernet ports to connect locally,
r
econfigure the laptop or PC with an IP address compatible with the new XIO IP address to
reestablish connection.
4.6.4 Configure the RMC
This procedure describes how to configure the RMC to establish communication with the XIO. The RMC
supports automatic discovery of XIOs on the field network when they are configured with valid and
compatible addresses. It is assumed that the RMC has already been configured with a valid IP address and
that the Auto Discovery Service is enabled (factory default).
The XIO interface on the RMC is the application that handles the detection and communication with the
XIO.
To configure the RMC:

ABB XIO-04 Specifications

General

Brand	ABB
Model	XIO-04
Category	Control Unit
Language	English