7 -7
CHASSIS
Pegaso 650 I.E.
7.1.3 REMOVING THE OIL SUMP GUARD
Carefully read 0.5.1 (PRECAUTIONS AND GENERAL
INFORMATIONS).
aWARNING
Wait until the engine and the exhaust silencer have
completely cooled down.
â—† Position the vehicle on the stand.
â—† Unscrew and remove the four screws (1).
Oil sump guard screw driving torque: 6 Nm (0.6 kgm).
aCAUTION
Handle the plastic and painted components with care
to avoid scraping or damaging them.
â—† Remove the oil sump guard (2).
NOTE If the deadening material inside the oil sump
guard (2) is deteriorated, contact an aprilia Official Dealer
to have it changed.
7.1.4 REMOVING THE RIGHT AND LEFT SIDES
Carefully read 0.5.4 (REASSEMBLING THE COMPO-
NENTS).
aWARNING
Wait until the engine and the exhaust silencer have
completely cooled down.
â—† Remove the saddle, see p 7.1.7 (REMOVING THE SAD-
DLE).
â—† Unscrew and remove the four screws (3).
Side cover screw driving torque: 3 Nm (0.3 kgm).
â—† Remove the side cover (4).
aCAUTION
Handle the plastic and painted components with care
to avoid scraping or damaging them.
NOTE If the heat-resistant material inside the oil sump
guard is deteriorated, replace it.
Release 00/2002-02
- 00
To Next Page
Loading...
Need help?
General
