APRILIA Pegaso 650 I.E. User Manual

GENERAL INFORMATION
1 -19
Pegaso 650 I.E.
 &!34%.).'%,%-%.43
1.10.1 JOINTS WITH HOSE CLAMPS AND SCREW
CLAMPS
Carefully read 1.2 (INSTRUCTIONS FOR USE OF FU-
EL, LUBRICANTS, COOLANT AND OTHER COMPO-
NENTS).
aCAUTION
Remove ONLY the clamps indicated in the mainte-
nance procedures.
This text is not to be intended as an authorization to
arbitrarily remove the clamps present on the vehicle.
aWARNING
Before removing a clamp, make sure that the removal
does not involve any fluid leakage; if so, provide for
preventing such leakages and protect the compo-
nents positioned near the joint.
HOSE CLAMPS
For the removal it is sufficient to use simple pliers, while
for the installation it is necessary to use a special tool (see
below).
Before removing a clamp, prepare the material neces-
sary for the correct reassembly.
NOTE Have the appropriate special tool m to hand:
– aprilia part# 0277295 (hose clamp installation pliers).
aCAUTION
Upon installation, replace the hose clamp that has
been removed with a new one having the same di-
mensions, see 0.4.2 (SPARE PARTS CATALOGUES).
Do not attempt to reinstall the removed hose clamp,
since it is unusable.
Do not replace the removed hose clamp with a screw
clamp or with other types of clamp.
aCAUTION
Proceed with care, in order not to damage the joint
components.
◆ Work with the pliers on the head of the hose clamp,
forcing until you release it.
SCREW CLAMPS
For the removal and installation it is sufficient to use a sim-
ple screwdriver.
aCAUTION
Check the conditions of the screw clamp and if nec-
essary replace it with a new one of the same type and
dimensions, see 0.4.2 (SPARE PARTS CATA-
LOGUES).
When fastening the clamp, make sure that the joint is
sufficiently stable.
Release 00/2002-02
- 00

APRILIA Pegaso 650 I.E. Specifications

General

Brand	APRILIA
Model	Pegaso 650 I.E.
Category	Motorcycle
Language	English