APRILIA Pegaso 650 I.E. User Manual

7 -19
CHASSIS
Pegaso 650 I.E.
7.1.20 REMOVING THE IGNITION SWITCH/
STEERING LOCK
Carefully read 0.5.1 (PRECAUTIONS AND GENERAL
INFORMATIONS).
◆ Position the vehicle on the stand.
◆ Turn the steering all the way over to the left.
◆ Turn the ignition switch to position “1”.
◆ Release the wiring from the fastening clamp (1).
NOTE Prepare a clamp to be used for the reassembly.
◆ Disconnect the electric connector (2).
◆ Unscrew and remove the screw (3).
◆ Use a chisel to cut into the head of the special screw (4)
and turn it until it loosens.
◆ Unscrew the screw (4) by hand and remove it.
NOTE When reassembling, use another screw of the
same type, tightening it until the head comes off.
◆ Remove the ignition switch/steering lock (5), withdraw-
ing it from below and retrieve the cable guide arch (6).
7.1.21 REMOVING THE HORN
Carefully read 0.5.1 (PRECAUTIONS AND GENERAL
INFORMATIONS).
◆ Rotate the handlebar completely leftwards.
◆ Disconnect the two electric terminals (7) of the horn.
◆ Unscrew and remove the nut (8).
◆ Remove the horn (9).
Release 00/2002-02
- 00

APRILIA Pegaso 650 I.E. Specifications

General

Brand	APRILIA
Model	Pegaso 650 I.E.
Category	Motorcycle
Language	English