SERVICE AND SETTING UP
2 -15
Pegaso 650 I.E.
î˜ î˜›î˜‹ !##%,%2!4/2
2.9.1 CHECKING THE OPERATION OF THE
ACCELERATOR CONTROL
For the maintenance intervals, see 2.1.1 (REGULAR
SERVICE INTERVALS CHART) under:
– Transmission cables and controls.
For the check, proceed as follows:
aWARNING
The use of the vehicle with damaged, excessively
bent or twisted accelerator cable may hinder the reg-
ular operation of the accelerator and make you lose
control of the vehicle while riding.
Make sure that the rotation of the handlebar does not
modify the engine idle speed and that the throttle grip re-
turns smoothly and automatically to its original position
after being released.
If necessary, proceed as follows:
NOTE For the lubrication of the components use the
specific lubricant available on the market.
â—† Check the correct position and the lubrication of the fol-
lowing components:
– sheath;
– throttle grip adjuster (1);
– throttle unit adjuster (2);
– cable couplings (ends);
– accelerator control (3).
â—† Check the idle speed, 2.9.2 (IDLING ADJUSTMENT).
â—† Check the accelerator control adjustment, 2.9.3 (AD-
JUSTING THE ACCELERATOR CONTROL).
Release 00/2002-02
- 00