7 -89
CHASSIS
Pegaso 650 I.E.
7.10.2 CHECKING THE COMPONENTS
aCAUTION
Make sure that none of the components appear to be
visibly distorted, broken, cracked and/or dented.
Replace any damaged components.
BEARINGS
â—† Manually rotate the rollers. It should rotate smoothly
without jamming and/or noise.
There should be no end play.
Any bearings featuring said defects should be
changed.
aCAUTION
Apply grease on the rollers, see 1.6 (LUBRICANT
CHART).
SEALS
â—† Make sure the seals are intact; should they prove dam-
aged or feature signs of excessive wear, change them.
SHOCK ABSORBER
â—† Make sure that there are no oil leaks from the shock ab-
sorber and that its travel is smooth and gradual.
If this is not the case, change the shock absorber.
If necessary, proceed to the adjustment, see 2.25.2 (AD-
JUSTING THE REAR SHOCK ABSORBER) and 2.25.3
(REAR SUSPENSION WITH HYDRAULIC PRELOAD
ADJUSTMENT m).
Release 00/2002-02
- 00
To Next Page
Loading...
Need help?
General
