3. Physical installation
3. PHYSICAL INSTALLATION
About this chapter
This chapter des cribes how the m echanica l se t up of the projector has to be done and how to realize the electrical conn ections.
Overview
• Positioning the DP2 K-20C at port window
• Installation of the exhaust system
• Connecting the projector with the power net
• Power loop through to the projector electronics
• Connecting a UPS with the projector electronics
The light pipe is made out of magnesium. If used in high humidity conditions, there might be some corrosion
visible. However, this does not affect the performan ce o f the projector.
R59770351 DP2K-20C 02/02/2010 15
To Next Page
Loading...
Need help?
General