Beckhoff TwinSAFE logic FB User Manual

Function blocks
Function blocks for TwinSAFE logic components 65
3.5.6 Display in TwinCAT 3
Display of the function block and its properties in TwinCAT 3.
Figure 3-21 FB MON in TwinCAT 3
Figure 3-22 FB MON properties
The function Safe Inputs after Disc Error is activated by default for the MON function block in the EL6910
and cannot be disabled. The display of the corresponding parameter and its value only applies if the
function block is used on an EL6900; it can be ignored for the EL6910. A warning is issued if the
parameter is set to TRUE under an EL6910.

Beckhoff TwinSAFE logic FB Specifications

General

Brand	Beckhoff
Model	TwinSAFE logic FB
Category	Industrial Electrical
Language	English