BES-940BC • BES-1240BC
182
Chapter 6 Embroidering
Step-forward/Step-back
Allows step-forward or step-back of stitches without embroidering.
Click to stop embroidering for step-forward/back mode.
The special tool bar appears in the step-forward/back mode.
Entering in the Step-forward/Step-back Mode
1. Click to stop embroidering.
2. Select [Step F/B] from the Operation menu or click
.
A cross appears on the screen. The current needle position is the intersection of the vertical and
horizontal lines.
Tool bar for step-back/step-forward
Current needle position
To Next Page
Loading...
Need help?
General
