Chapter 7 Operation of Machine
BES-940BC • BES-1240BC
193
2. Stopping the Machine
2-1 Procedure to Stop the Machine
Press the stop button or
STOP
to stop
operation of the machine.
The stop button adopts the push-turn-lock
method. If you want to keep the machine
stopped, turn the stop button clockwise
while pushing it.
2-2 Resetting Machine Stop
• When the stop button is locked by turning
it while pressing it, the message, "STOP",
is displayed while blinking on the operation
panel.
• To reset the stop button, turn it
counterclockwise while pressing it. The
knob of the button pops up and machine
stop is reset.
• Check to see that the other stop button is
reset.
2-3 Emergency Stop of the Machine
When the emergency stop button is
pressed, all power except for that for the
fluorescent lamp is turned off.
2-4 Resetting Emergency Stop
When turning the emergency stop button
in the direction of the arrow illustrated on
the button, the knob of the button pops up
and emergency stop is reset.
Press the power switch to turn on the
power again.
Emergency stop button Power switch
To Next Page
Loading...
Need help?
General
