Brother BE-0901E PC User Manual

276 pages

To Next Page

To Previous Page

BES-940BC • BES-1240BC

253

Chapter 11 List of Error Codes

Code Error Measures

E-E9

E-EA

E-EB

E-EC

E-ED

E-EF

E-F1

E-F2

E-F3

E-F4

E-F5

E-F6

E-F7

E-F8

E-F9

E-FA

E-FB

E-FF

This is not usually displayed.Send/Receive inconsistent error during

interfacing to main PCB CPU

ACK code receiving

error during

interfacing to main PCB CPU

Send/Receive ID code error during

interfacing to main PCB CPU

Send data checksum

error during

interfacing to main PCB CPU

Data empty error during interfacing to

main PCB CPU.

Receiving error on interface

Send time up error

Request-to-waiting time up error

Request-to-recive time up error

Receive command error

NACK code receiving error

Data requested for needle position can

not be returned.

It is not receive command for the

request one.

PRE code error

No applicable command

Interface receive data sum check error

Send time up error

No status is returned from main shaft,

lower shaft motor, or CPU.

Other manuals for Brother BE-0901E PC

Maintenance14 pages

Manual3 pages

Parts Manual143 pages

User Guide3 pages

Supplementary Guide5 pages

Rotary Hook Instructions1 page

Reference14 pages

Referencia De Máquina14 pages

Questions and Answers:

J
Joel MarshallAug 11, 2025
Why is my Brother BE-0901E PC Sewing Machine thread breaking?
- W
  Whitney LopezAug 11, 2025
  Thread breakage in your Brother Sewing Machine can stem from several issues. Ensure the machine is threaded correctly and the thread tension isn't too high. Check for clogs in the rotary hook assembly and ensure there's thread in the bobbin. Inspect the needle for bends or flaws on the needle plate, rotary hook, or bobbin case that might cut the thread. Verify the needle is installed correctly and the presser foot is in contact with the material. Confirm the thread thickness and needle size are appropriate and that a thread with a left-hand twist is used. Also, check for adhesive on the needle, weak material tension, excessive play between the rotary hooks, smooth outer rotary hook rotation, proper rotary hook stopper clearance, and smooth thread flow from the bobbin case.
M
Michael BakerAug 19, 2025
What to do if my Brother Sewing Machine needle keeps breaking?
- B
  bankstroyAug 19, 2025
  If the needle of your Brother Sewing Machine is breaking, check if the needle is correctly attached (direction, height, etc.) and not bent. Also, verify the rotary hook attachment and timing settings. Look for backlash in the needle bar case and ensure the rotary hook stopper is correctly attached. Confirm that the needle size is correct, the tip is sharp, and the thread passes through the hole center of the presser foot.