4-20
Confidential
6 IF YOU REPLACE THE RECORDING PAPER FEEDING RELATED
PARTS OR MAINTENANCE UNIT
The paper feeding related parts to be adjusted after replacement are listed below.
• Paper feed roller • Inner chute ASSY
• Paper ejection roller • Registration sensor PCB ASSY
• Carriage PCB ASSY • Carriage motor ASSY
• Flushing box • Paper feed motor
• Platen ASSY • Flushing base
• CR encoder strip • Maintenance unit
• PF encoder disk • CR timing belt
• PF encoder sensor PCB ASSY
<Operations>
6.1 Check Head Nozzles (Maintenance mode 09)
6.2 Adjustment of Software Correction for Inclination/Corrugation/Ruled Lines
(Maintenance mode 65)
6.3 Update the Paper Feeding Correction Values (Maintenance mode 58)
6.4 Margin Adjustment in Borderless Printing (Maintenance mode 66)
6.5 Check Printing
<Requirements>
(1) USB cable: 1 piece
(2) Create a temporary folder in the PC's C drive (Windows XP or later).
(3) Download utility (FILEDG32.EXE)
Make a copy of the download utility in the temporary folder in the C drive.
(4) Maintenance driver (MaintenanceDriver.zip)
Make a copy of the maintenance driver in the temporary folder in the C drive. Extract
the copied file and install it. Refer to "APPENDIX 3. INSTALLING THE
MAINTENANCE DRIVER" for details on the installation.
(5) Data files of print patterns
To Next Page
Loading...
Need help?
General