5-4
Confidential
Non-touch panel model
<Operating Procedure>
(1) When the machine is on standby, press [Menu], [Mono Start], and [Menu] in order. The
LCD will display "0â– â– MAINTENANCE â– " and the machine will enter end-user
accessible maintenance mode.
(2) To select one of the maintenance mode functions, directly specify the maintenance
mode you want to use.
(3) When each of the maintenance mode functions is completed, the machine
automatically returns to standby.
Note To stop the procedure midway and return the machine to standby, press [Stop].
1.2 Operations of the Keys in the Maintenance Mode
The operations of the keys used in the maintenance mode are different depending on the
panel specifications on the model.
1.2.1 Entering ten keys, [ ] or [ ] in the maintenance mode with models without these
keys
Press [ ] or [ ] to display desired letters on the LCD, and press [OK] to enter.
To Next Page
Loading...
Need help?
General