Brother MFC Series User Manual

5-15
Confidential
1.4.6 Worker Switch (WSW) Setting and Printout (Maintenance modes 10, 11)
[1] Worker Switch Setting (Maintenance mode 10)
<Function>
The worker switch functions (listed below) customize the machine to meet various needs.
They can be activated with the procedures using the control panel keys.
The worker switches have been configured at the factory in conformity to the
communications standards and codes of each country. Do not disturb them unless
necessary.
List of Worker Switches
WSW No. Function
WSW01 Dial pulse setting
WSW02 Tone signal setting
WSW03 PABX mode setting
WSW04 TRANSFER facility setting
WSW05 1st dial tone and busy tone detection
WSW06 [Redial/Pause] key setting and 2nd dial tone detection
WSW07 Dial tone setting 1
WSW08 Dial tone setting 2
WSW09 Protocol definition 1
WSW10 Protocol definition 2
WSW11 Busy tone setting
WSW12 Signal detection condition setting
WSW13 Modem setting
WSW14 AUTO ANS facility setting
WSW15 REDIAL facility setting
WSW16 Function setting 1
WSW17 Function setting 2
WSW18 Function setting 3
WSW19 Transmission speed setting
WSW20 Overseas communications mode setting
WSW21 Telephone Answering Machine (TAD) setting 1
WSW22 Error Correction Mode (ECM) and call waiting caller ID
WSW23 Communications setting
WSW24 Telephone Answering Machine (TAD) setting 2
WSW25 Telephone Answering Machine (TAD) setting 3
WSW26 Function setting 4
WSW27 Function setting 5
WSW28 Function setting 6
WSW29 Function setting 7
WSW30 Function setting 8
WSW31 Function setting 9
WSW32 Function setting 10
WSW33 Function setting 11
WSW34 Function setting 12
WSW35 Function setting 13
WSW36 Function setting 14

Brother MFC Series Specifications

General

Brand	Brother
Model	MFC Series
Category	Printer
Language	English