Brother MFC Series User Manual

5-13
Confidential
1.4.4 ADF Performance Test (Maintenance mode 08) (For ADF Models Only)
<Function>
The function counts the documents fed by the automatic document feeder (ADF) and
displays the count on the LCD for checking the ADF performance.
<Operating Procedure>
(1) Set documents on the ADF unit.
The LCD continues to display "■■ MAINTENANCE ■■■".
(2) Enter [0] and [8] in the initial stage of the maintenance mode.
The machine feeds the documents in and out while counting them and displaying "ADF
CHECK P.**" on the LCD.
(** shows the current count.)
(3) Press [Stop] or [X] to return the machine to the initial stage of the maintenance mode.
Note If no document is set on the ADF, the machine displays "NO DOCUMENT" on the
LCD and returns to the initial stage of the maintenance mode.
1.4.5 Printout of Test Pattern (Maintenance mode 09)
<Function>
This function prints out a test pattern (Print Quality Check sheet) to allow the service
personnel to check the print quality, together with the serial number.
If any print quality problem is found, use "1.4.26 Purge Operation (Maintenance mode 76)"
in this chapter to perform head cleaning.
<Operating Procedure>
(1) Enter [0] and [9] in the initial stage of the maintenance mode.
The machine displays "PRINTING" on the LCD and prints out a test pattern.
If no recording paper is loaded in the paper tray, printing will be canceled.
(2) Upon completion of printing, the machine returns to the initial stage of the maintenance
mode.

Brother MFC Series Specifications

General

Brand	Brother
Model	MFC Series
Category	Printer
Language	English