Brother MFC Series User Manual

5-58
Confidential
1.4.30 Equipment Error Code Indication (Maintenance mode 82)
<Function>
This function displays an error code of the last error on the LCD.
<Operating Procedure>
(1) Enter [8] and [2] in the initial stage of the maintenance mode.
The machine displays "MACHINE ERR XX" on the LCD.
Tip If two or more errors have occurred, press [Mono Start] to cycle through the error
codes.
(2) Press [Stop] or [X] to return the machine to the initial stage of the maintenance mode.
1.4.31 Output of Transmission Log to the Telephone Line (Maintenance mode 87) (For fax
models only)
<Function>
This function outputs the transmission log to the telephone line. It allows the service
personnel to receive the transmission log of the user’s machine at a remote location and
use it for analyzing FAX transmission problems arising in the user’s machine.
<Operating Procedure>
- At the service site
(1) Call the user’s machine at a remote location from your machine.
- At the user site, have the user perform the following.
(2) When the machine is on standby, press [Menu], [Mono Start], and [Menu] in order.
(3) Press [8] and [7] in this order.
The machine displays "SENDING P.01" on the LCD and transmits the error list.
Upon completion of error list transmission, the machine returns to the standby state.

Brother MFC Series Specifications

General

Brand	Brother
Model	MFC Series
Category	Printer
Language	English