Brother MFC Series User Manual

2-46
Confidential
4.2.2 Two or more sheets of paper fed at a time
<User Check>
- Check if the recording paper is loaded correctly in the Paper tray.
- Check if the number of recording paper loaded in the Paper tray is within specified
volume.
- Try reversing the recording paper in the Paper tray, or rotating direction of the paper for
180 degrees.
- Check if the recording paper's thickness is within specifications.
- Shuffle recording papers thoroughly and then reload them in the Paper tray.
4.2.3 Recording paper feeding at an angle
<User Check>
- Check if the recording paper is loaded correctly in the Paper tray.
- Adjust the paper tray guide to match the recording paper size.
- Check if the recording paper's thickness is within specifications.
- Check if too much recording paper is loaded in the Paper tray.
- Clean the Paper pull-in roller.
Step Cause Solution
1 Bank ASSY worn out Replace the Paper tray.
2 Base pad worn out Replace the Base pad.
Step Cause Solution
1 Paper pull-in roller not
mounted in place
Reattach the Paper pull-in roller.
2 Paper feeding path parts out of
place
Set the paper feeding path parts into place.
3 Main PCB defective Replace the Main PCB ASSY.

Brother MFC Series Specifications

General

Brand	Brother
Model	MFC Series
Category	Printer
Language	English