CAS CL series User Manual

105
2.13.3 Markdown (Menu code 1720)
( MENU → 7. Print → 2. Mark down )
The Markdown Menu is used to determine if both the original and discounted unit
price, total price, weight or quantity information is printed on the label. There are 4 sub-
menus available.
▶ Markdown Sub-menu
No Sub-menu Description
1 Total Price Markdown
Select “Yes” to print both the original Total Price and the
Discounted Total Price if any. Otherwise select “No”.
2 Unit Price Markdown
Select “Yes” to print both the original Unit Price and the
Discounted Unit Price if any. Otherwise select “No”.
3 Weight Markdown
Select “Yes” to print both of the original Weight information
and the Discounted Weight information if any. Otherwise,
select “No”.
4 Quantity Markdown
Select “Yes” to print both the original Quantity information
and the discounted Quantity information if any. Otherwise,
select “No”.
1. Select Yes or No by using 1 or 0 key
and press “PRINT” key
2. After setting all of above MARK
DOWN sub-menus use “X/ESC” key
or “SAVE” key to go back to PRINT
main menu.
2.13.4 Printer Hardware (Menu code 1730)
( MENU → 7. Print → 1. Printer Hardware )
This section is to explain how to set printing H/W environments in the
following table.

CAS CL series Specifications

General

Brand	CAS
Model	CL series
Category	Scales
Language	English