131
2.15 Report
2.15.1 Introduction
X mode is used to read (i.e. print and display) sales data. There are variety
of reports that you can generate from X mode. Each of these reports is kept in
two separate counters or “books” called X1 and X2. The X1 and X2 reports
allow you to print reports at any time for either of the reporting periods.
You can use X1 reports to see current daily totals and X2 reports to see current
weekly totals. The time period combinations (daily, weekly, monthly, etc.) are
determined by how you use the Z1 and Z2 (reset) reports.
Remember that you can generate as many X reports as you would like
because X mode does NOT clear any sales data.
2.15.2 Report Menu (Menu code 1600)
( MENU → 6. Report )
No. Submenus Description
1 X1 Report Print and display sales data of period 1
2 Z1 Report Print, display and clear sales data of period 1
3 X2 Report Print and display sales data of period 2
4 Z2 Report Print, display and clear sales data of period 2
5 Clear All Clear all reports of period 1 and 2
To Next Page
Loading...
Need help?
General
