CAS CL series User Manual

85
2.9 Programming Slaughter House
2. 9.1 Slaughter House (Menu code 1350)
( MENU → 3. PLU Date Table II → 5. Slaughter House )
This menu is used to program Slaughter House information. Slaughter House
information is used when programming Traceability Numbers. Therefore Slaughter
House information programming should be completed prior to programming
Traceability.(Menu 1330)
2. 9.2 New/Edit Slaughter House (Menu code 1351)
( MENU → 3. PLU Date Table II → 5. Slaughter House → 1. New/Edit )
▶You can press the SAVE key at anytime to save the current data and if
you want to exit without saving, press the ESC key.
1. Enter slaughter House number
• This value can be from 1 to 999.
EX) Slaughter house No. = 1
2. Enter Slaughter House
• Enter slaughter house name or registered
number.
EX) Slaughter house registered no. = KSH12
3. Enter slaughter house country number
• You can use contry number which is
programmed at menu 1341
EX) Slaughter house Country No. = 1.
KOREA
4. Exit menu
• If you want to exit without making any
changes, press ESC key.

CAS CL series Specifications

General

Brand	CAS
Model	CL series
Category	Scales
Language	English