121
2.14.9 List User (Menu code 1853)
( MENU → 8. SCALE CONFIG → 5. User/Security Con. → 3. List )
1. Enter start number and end number
to check
Note: To list all, press the SAVE key.
EX) User No.'s 1~10
Note: There is no confirmation request when
deleting a Clerk No. Pressing the PRINT key
will cause the Clerk No. entered to be deleted.
Press Print Key to List User No.'s on screen. After User No.'s are listed on the
screen, pressing the TEST key will print the User No.'s.
Note: Printing should be done on continuous label stock.
2.14.10 Delete User (Menu code 1854)
( MENU → 8. SCALE CONFIG → 5. User/Security Con. → 4. Delete )
1. Enter clerk number to delete
EX) Delete clerk no. 2
2.14.11 Config Permission (Menu code 1855)
( MENU → 8. SCALE CONFIG → 5. User/Security Con. → 5. Config Permission )
Config Permission level is directly associated with the Clerk permission level (Chapter
2.14.7). If a Clerk's permission level is lower than the Config Permission level assigned
to a function, then the Clerk will not be allowed to access that function.
Ex.) Config Permission level for using the Price Change Key is set to a 2.
Clerk 5 has a permission level of 1
Clerk 5 will not be able to use the Price Change Key
Clerk 6 has a permission level of 2
Clerk 6 will be able to use the Price Change Key
Note: If Config Permission level is set to a 0, all clerks can access that function.
To Next Page
Loading...
Need help?
General
