151
② Enter the weight of container using
numeric keys.
EX) 200 g
③ Press “TARE key after removing item and container from the platter.
Note: Parameter 605 “Accumulation Tare” and parameter 606 “Subtraction
Tare” must be set.
3.3.6 Tare Override
① Call up a PLU including tare (weight of
container).
EX) PLU #3 s tare = 100 g
② Place the container (Tare Weight of new container must be greater that recalled Tare Weight.)
for TARE OVERRIDE.
③ Pressing “TARE” key overrides current PLU tare (weight of container) and the
weight becomes “O”.
Note: Parameter “603 PLU Tare Override” must be set.
To Next Page
Loading...
Need help?
General
