2.13.11 Label Preprint (Menu code 1737)
( MENU → 7. Print → 3. Printer Hardware → 7. Label Preprint )
Enter “Y(Yes)” or “N(No)” to select
Preprint mode and any value of the preprint
length from “0 mm” to “10 mm”.
Press “TEST” to test preprinting.
After setting all of above H/W setting
submenus use “X/ESC” key to go back to
PRINT main menu
2.13.12 Serial Number Format (Menu code 1740)
( MENU → 7. Print → 4. Serial Number Format )
This Menu is for programming the Serial Number Format that can be printed on the
Label/Ticket. The Serial Number can be used to keep track of the total number of
Labels/Tickets issued for a given time period.
① Press “4” to go to SERIAL NUMBER
FORMAT menu in PRINT main menu.
Enter appropriate data in [ ].②
Ex.) Label Serial No. = #0001
Ticket Serial No. = RCT#001
Note: Programmable Item definitions are
explained in the chart titled Meaning.
To Next Page
Loading...
Need help?
General
