55
2.2.19 List Origin (Menu code 1252)
( MENU → 2. PLU Data Table I → 5. Origin → 2. List )
1. Set the List Range
• Set the range of origin that you wish to
list
EX) Origins 1~20
• Press Print Key to List Origins on screen.
After Origins are listed on the screen,
pressing the TEST key will print the Origins.
Note: Printing should be done on continuous
label stock.
2.2.20 Delete Origin (Menu code 1253)
( MENU → 2. PLU Data Table I → 5. Origin → 3. Delete )
1. Enter Origin No.
EX) Delete Origin 10.
Note: There is no confirmation request when
deleting an Origin . Pressing the PRINT key
will cause the Origin entered to be deleted.
2.2.21 Barcode (Menu code 1260)
( MENU → 2. PLU Data Table I → 6. Barcode )
Up to 99 different Bar Code Formats can be programmed in the CL5000. Different Bar
Code Formats can be assigned to individual PLU's or one Bar Code Format can be
used for all PLU's by enabling the Global Barcode Format Setting (Menu 1520).
2.2.22 New/Edit Barcode (Menu code 1261)
( MENU → 2. PLU Data Table I → 6. Barcode → 1. New/Edit )
1. Enter Barcode No.
• This value can be from 1 to 99.
EX) Barcode No = 1
To Next Page
Loading...
Need help?
General
