2.15.7 X1/X2 Group Report (Menu code 1614/1634)
( MENU → 6. Report → 1. X1 Report /X2. Report → 4. Group )
Press “4” key on X1/X2 Report menu screen.
Enter group range to check.
If you did not set a group number in a PLU
when programming the PLU it will be
included in Group 0.
Ex) Group 0 ~ Group 23
You can see group sales data by pressing
“PRINT” key.
To print report, press the “TEST” key.
To exit this menu, press “ESC” key.
Note: If the setting of MENU 1872 (Print All Report within Range) is set to NO, then
Groups within the range with no sales data are not printed. If set to YES, then all
To Next Page
Loading...
Need help?
General
